Antenna Blanking Plate - 09-6073

09-6073 Antenna Blanking Plate

Designed for blanking off the holes and markings which are left when an unwanted antenna is removed.  Alternatively it could  also be used when needing to cover any other holes or damage. Diameter 185mm.

Fixing in place

• Remove the unwanted antenna and clean the area, removing all traces of old sealant, making sure the area is free of dirt and grease.
• On the underside of the blanking plate cover with sealant, ensuring the screw holes are covered.
• Position over the old fixing holes and secure with the four screws provided.
• Remove and unwanted sealant.

Important - Do not over pack with sealant as it may cause the plate to distort when screwing into place.